wpe18.jpg (5238 bytes)

Description Photos

  Toledo Speedway is a real 1/2 mile track in Toledo, Ohio, and is banked at 18 degrees. We have worked as hard as possible to provide the most accurate redition of the track possible. Unfortunately, some graphical issues could not be resolved. The pits in Turns 1 and 2 were particularly hard to create and contain the most problems. The seperating wall shows through the cars when on pit road but lets the cars show through it when on the track. The inside wall lets everything show through it from everywhere. There is also a glitch on the backstraight where the car hits a bump and shifts from side to side. The wall does not line up perfectly so try to stay off the wall at that point. If you can't, you might get lucky and nothing will happen, but more than likely the car will be spun to the outside wall causing some damage: nothin major. There are some other minor graphics glitches but nothing that should hinder the overall racing.

Now to give credit where credit is more than due. Thanks to Tony Krist for allowing me to use some of the graphics from his version of Toledo posted at Coast to Coast and many thanks to Cal at BST who did many of the graphics and taught me how to do the rest. AI was done primarily by Gator Brian and I did the integrating and trk (physical track suface/banking) work. Also thanks to all the testors who helped with making this such an awesome track.

Downloads
Toledo Speedway Track Installer Download
TOLEDO1.jpg (157862 bytes)
 
TOLEDO2.jpg (136373 bytes)
 

TOLEDO3.jpg (147676 bytes)